24*10W RGBW 4in1 LED theatre spot light with barndoor for theatre,TV studios
HTK LCW-24*10W-4in1 is a newly released led backdrop light with barndoor, it has high efficient 10Watt RGBW 4in1 LEDs. Undoutedly, this fixture is a good choice for applications like meeting room, school stage, hotel stage, or the TV studios. Unlike the warm white and daylight fixture, this item is able to project beautifully mixed, soft field of richly saturated colors.
It is designed in small square size, with high efficient customed optical lens, the color mixing is perfect, no RGB shadow at all. And the light output is high, very bright in color. The barndoor can be set in any angle for avoiding light glaring. And this light works very silently, for the purpose of theatrical use, while heat cooling is excellent, too.
With daisy chained power cable and signal cables, this light is good for installation, so users don't need to provide a lot of power sockets. The power plug can be customized according to users request. Most countries' standard plugs are available.The signal cables are attached with 3-pin XLR connectors, they are linkable with each other, or can be connected directly with a DMX controller.
The input voltage is wide range from AC90V to AC 240V, very stable for any voltage. It shift automactially to the right one, providing good power environment to the light. Therefore, it is a fixture good for international touring, or unstable current environment.
As for the control system, there are 4 working modes: Auto-run, master'slave, sound, and DMX. And there are 12 onboard programs, users are able to run it in auto run mode by setting one light as master light and the rest as slave, it can also run in sound-active mode. In DMX mode, users just need to set the LED display in DMX mode by setting them the same DMX ID, then they are able to be controlled by a DMX controller or PC software like Daslight, sunlite suite.
> small in size, light in weight, excellent heat cooling
> good for theater, installation, church, and TV studios
> attached daisy chain power cable and signal cable
> 24 pcs 10W RGBW 4in1 high brightness LED
> customed optical lens, perfect color mixing, pure bright color
> smooth dimming, stepless between 0-10%
> flicker-free for video shooting
> special designed square size, with barndoor
Input Voltage: AC100V-240V, 50/60Hz(auto ranging)
Power consumption: 240W
LEDs: 24pcs RGBW 10W LEDs
LEDs average lifespan: >50,000hrs
Drive mode: constant current
Drive current: 400mA
Typical lumen maintenance: 70% @ 50.000 hours
Lens: Customized high efficiency optical lens
Beam angle: 25 degree, 45 degree, 60 degree
CONTROL AND PROGRAMMING
Control mode: DMX, auto-run, master/slave, sound-active
DMX channels: 4/8 CHs
DMX data In/Out: 3-pin XLR ( 5-pin XLRoptional)
Setting and addressing: 4-digit LED display
Color mixing mode RGBW
Electronic dimmer: 0-100% linear smooth dimmer, 16 bit dimming
Electronic strobe: 0-20 times/sec.
Pre-programmed color change, color fade, color jump
Housing: aluminum , black color
Forced air convection, no fan, no noise
ENVIRONMENT AND PHYSICAL
IP rating: IP20, indoor use
Environment temp: -20℃-40℃
Dimensions:35*25*20cm (with yoke)
Suitable for Theater, events, parties, meeting room, hotel, productions, musical condert, church, TV studios